To set up a guidance system, verify the relative positions of rooms and monitors. Provide guidance by using both information text and symbols (arrows etc.).

1. The Digital Signage WebApp comes with the following standard arrows:
   BpAussApp-arrow_straight_out.svg
   BpAussApp-arrow_left.svg
   BpAussApp-arrow_right.svg
   BpAussApp-arrow_back.svg
2. If you do not want to use the standard arrows, save other symbols in JPG, PNG or SVG format (max. 1MB) in the  Gallery. Use a fixed group name in category 1 (p.ex. "Arrows for signage"). Give the image a unique, descriptive name ("signage arrow right orange").
3. Go to the   Room and open the  Equipment tab.
4. In the Booking information column per monitor position, add a symbol from the  Gallery in the form "gallery:{image name for directional arrow}".
   Important: The name must correspond exactly to the name in the gallery no additional spaces may be inserted.
5. Insert either a symbol and text, or just one of the two. There must be no space between the two, and both parameters must end with a ‘;’. Pay careful attention to the exact syntax!
   Example: Room 11 is on the same level to the left, through a dividing door as you face the monitor
   Room 11 has the following in the equipment item "Entrance area next to the stairs" the remark
   "gallery:arrow-left.svglabel:through the dividing door
   Room 11 is displayed on the monitor in the entrance area with an arrow pointing to the left and the text "through the dividing door".
   No information is needed for the equipment item "Room 11" (the monitor next to the room door) as directions make no sense here.
6. Extended mode: If you want to use view 4 in extended mode, enter notes/arrows either for all rooms or for no room. Different entries may distort the view.
7.  Save your input by clicking on the icon in the top left-hand corner of the input window.